PROFILE PLUS 2 CS mixer wagon

Benefits
Equipment
Specifications
Media
Mobile app

Download the Literature

PROFILE

Français Deutsch čeština dansk Español Suomalainen Italian Nederlands norsk Polski Português Русский svenska Türkçe English Русский

Countless solutions!

The PROFILE PLUS 2 CS mixers have 2 vertical augers, a straw-blowing turbine, a narrow hopper and feed out via a cross-conveyor. Available in 15 to 20 m³ capacities, these machines are suited to herds of between 75 and 150 cattle.

Find a distributor near you

Download the Literature

PROFILE

Français Deutsch čeština dansk Español Suomalainen Italian Nederlands norsk Polski Português Русский svenska Türkçe English Русский

Benefits
Equipment
Specifications
Media
Mobile app

The countless distribution configurations make this new range of PROFILE PLUS twin-auger vertical mixer wagons unique. Due to awkward building configurations, many farms have been unable to switch to mixed rations. The PROFILE PLUS twin-auger vertical mixer wagon ranges offer practical solutions - you will love the upgrade to a dual purpose, higher specification machine.

The two augers driven on the same driveline, mix the product in a figure-of-eight pattern, which allows for optimum product flow in the tub, with no blockages and no additional power requirement. Like the PROFILE single auger mixer wagons, the wide distribution doors (1100 mm) ensure a quick clean-out of the entire tub.

Exceptional mixing quality at a reduced cost

Perfectly controlled fill rate

The polygonal shape of the front, rear and sides of the tub (specific to the PROFILE models) ensures smooth fodder circulation. The entire volume of the tub is used during chopping and mixing. There are no “dead” zones or fodder build-up: every m3 is used! The double-pitch angle of each auger guarantees quick breakdown of feed, no matter how full the machine already is.

Power requirement: quality mixer wagons at an unbeatable price!

7 hp per tonne of mixture: save money on fuel!

The lower power requirement of the PROFILE range is the result of several technological designs:
- Auger design: the continuous helix of the mixing auger gravitates the fodder from the bottom of the tub to the top without any forced movements. The mixing process is performed easily and smoothly for greater fuel efficiency.
- Auger diameter: the smaller the auger diameter, the shorter the scraper arm, resulting in reduced power requirement.
- Auger rotation direction: in twin-auger vertical mixer wagons, the augers rotate the mixture in a figure-of-eight pattern. This ensures regular fodder circulation and prevents material from blocking up against the sides of the tub for improved energy efficiency.

The optional two-speed gearbox further reduces the power requirement. This option is recommended for farmers who travel long distances with a loaded mixer wagon. Reducing the auger speed will allow for smooth start-up before the ration distribution phase.

Exclusive KUHN mixing auger!

The double-pitch angle of the auger enables quick breakdown of feed, no matter how full the machine already is.

To reduce power consumption, the PROFILE range is equipped with asymmetric knives which have a “self-cleaning” effect and also have a progressive-cutting knife edge for constant torque transfer. The continuous auger helix naturally moves the fodder from the bottom to the top of the tub for even mixing with no forced movements, reducing fuel consumption during the mixing process.

The auger material and design has been selected to provide maximum resistance to wear.

Tried and tested transmission and drive systems!

The machine transmission is made up of a two-stage bearing therefore even during breakdown of a whole bale, stress is absorbed.
The combination of the pre-stressed subframe and the solid auger base provides maximum resistance to the load bearing in the bottom of the machine.
The unit is fitted on a collar which reaches up to approximately half the auger height, thus protecting the transmission from lateral forces exerted on the auger.

Tried and tested transmission: representing KUHN's extensive experience and technological expertise

Mixing: precision, with a 1.2% margin of error!

The mixing quality of KUHN TMR mixers is hitting new heights. Analysis of five samples taken at eight different points of a freshly distributed feed-out showed that, the dry matter variation coefficient is just 1.2% after a mixing time of only 3 minutes (PROFILE twin-auger vertical mixer submitted to German DLG test No. 6086F).

Homogeneous fodder distribution is guaranteed over the longest feed troughs, ensuring that each animal benefits from all the nutritional values of the ration.

158 kg of straw per minute!

Turbine powered by the POLYDRIVE system

The straw-blowing turbine is driven by a disengageable belt, for flexible start-up and minimum noise during operation and the PTO does not have to be switched off to stop the turbine. The large diameter of the turbine (1540 mm) allows it to project straw to a range of 18 m.

The two-speed gearbox allows you to switch to a lower speed when bedding or working close range.

VENTIDRIVE

The special shape of the PROFILE PLUS straw blowing hatch (VENTIDRIVE patented asymmetric shape) improves straw suction from the turbine. A regular flow is guaranteed at very low rpms. The straw backflow phenomena encountered on rectangular hatches with a flanged turbine are a thing of the past.

The instant straw blowing rate is equivalent to the machines in the KUHN bedding range!

Cross-conveyor: maximum visibility

A wide selection of possible combinations!

For each member of the herd to get their maximum feed intake, the feed-out of the mixed ration must be evenly mixed and distributed across the whole length of the feed passage. It’s important to reduce competition for feed between livestock in the same pen. All animals must get their fair share of quality mixed rations!

When the animals return to the buildings after grazing, providing a homogeneous ration is the best solution to avoid them pushing and shoving for feed.

The PROFILE range features an impressive selection of feed-out solutions to ensure distribution of the rations in all the types of buildings. Whether you have sheds with no separate exit, troughs with retaining rims or very narrow feed passages, feeding tables on both sides of the passage requiring simultaneous distribution, or other constraints requiring distribution from the rear of the machine, you will find what you need in the PROFILE range.

Cross-conveyor: maximum visibility

The cross-conveyor can be positioned at the rear of the PROFILE PLUS range.

As standard, feed can be distributed on the left or right-hand side. The conveyor is driven by a hydraulic motor at each end guaranteeing perfect operation regardless of the rotation direction.

The PVC belt ensures that fodder doesn’t travel back underneath the belt. The feed passage always remains clean after distribution.

As an option, the cross-conveyor can be hydraulically offset by 250 mm to the left or the right of the machine: ideal for keeping fibrous rations away from the tyres of the mixer and getting the fodder closer to the feed barrier!

Equipment

K-NOX Mixing augers and K-NOX doubling plates: Long Life Solutions!

K-NOX substantially increases the life expectancy of the auger - the central component of the mixer which determines its level of performance. The entire mixing auger is made of K-NOX: the whole unit is protected (coil, cone, scraper) therefore it is more resistant to the wear and tear caused by friction, acidic feed and general corrosion.
For even greater durability, the K-NOX doubling plates are available as an option.

Swivelling chute 220°

Straw can be blown out the right-hand side of the machine up to 18 m and out the left-hand side up to 13 m in sheds. The “220° swivel chute kit” can also be retrofitted to machines already working.

Dust control system for cleaner straw blowing

The CLEANSTRAW system helps to reduce the quantity of airbourne dust circulating in your buildings during straw blowing, simply by adding water. Built into the turbine drive system, the spray nozzles are activated at precisely the right moment.

Magnets: play it safe with your animals!

Metal trap: play it safe!

All the models in the PROFILE range can be fitted with a magnet on the mixing auger. This system considerably reduces intestinal injuries caused by the ingestion of metal fragments contained in the fodder (barbed wire, scrap wire etc.).

Hydraulic counter-knives for fibrous rations that require more chopping

For fibrous rations that require more chopping, add the option of two hydraulic counter-knives. Then you can extend and retract the counter-knives as needed from the tractor cab.

Dealing with an expanding herd and the new buildings layouts

A machine that can adapt to your herd size and ration type

KUHN mixers grow with your farm. As a result of an increase in your herd size or a change to ration components, you may be required to change the capacity of your TMR mixer. Depending on your model in the PROFILE PLUS range, you can increase your machine’s capacity by at least 33 %.

To adapt to all types of troughs

The PROFILE range can be fitted with a large selection of hydraulically tilting conveyors to deliver feed to raised troughs. The tilting conveyors come in different lengths and are designed with PVC belts.

Specifications

Technical characteristics


Capacity (m³)
Mixing system
Max. blowing distance
Minimum PTO power requirement kW (hp)
PTO speed (min^-1)
Output mini/maxi (l/min) at 180 bar (pressure required)
Minimum tractor hydraulic requirement

PROFILE PLUS 15.2 CS	PROFILE PLUS 16.2 CS	PROFILE PLUS 18.2 CS	PROFILE PLUS 20.2 CS
15	16	18	20
2 vertical augers	2 vertical augers	2 vertical augers	2 vertical augers
on the right up to 18 m	on the right up to 18 m	on the right up to 18 m	on the right up to 18 m
49 (66) > 59 (80)	52 (71) > 63 (85)	55 (75) > 66 (90)	58 (79) > 70 (95)
540	540	540	540
20 - 50	20 - 50	20 - 50	20 - 50
1 SA with free return	1 SA with free return	1 SA with free return	1 SA with free return