EUROMIX 3 DL mixer wagon

Benefits
Equipment
Specifications
Media
Mobile app

Download the Literature

EUROMIX

Français Deutsch Türkçe čeština Español Suomalainen Italian norsk Polski Português Русский svenska English Türkmenler Русский

XXL for daily work performance!

EUROMIX mixer with 3 vertical augers, lateral distribution and large hopper. Available in 28, 33, 39 and 45 m³ capacities, for dairy herds of between 140 and 360 cattle.

Find a distributor near you

Download the Literature

EUROMIX

Français Deutsch Türkçe čeština Español Suomalainen Italian norsk Polski Português Русский svenska English Türkmenler Русский

Benefits
Equipment
Specifications
Media
Mobile app

The EUROMIX triple vertical auger mixer wagons feature capacities ranging from 28 to 45 m³. EUROMIX triple auger models come with direct feed systems and provide impressive delivery rates. For example, the 45 m³ versions can feed up to 360 dairy cattle in a single pass.
They are high-end industrial machines and feature a 6-point weighing system to guarantee the accuracy of the quantities loaded and discharged. To make the most of your machine, you can choose a tandem axle, tandem steering axle or tridem steering axle.

High mixing quality for optimum rumination!

Loading comfort and accuracy!

The EUROMIX mixer tub geometry was designed to make bucket loading easier. The large opening, on single and double auger models, allows for clean and easy loading - even with larger buckets. Depending on the model, the top part of the EUROMIX tub can be fitted with a reinforced rim or an extension with a cross-section ring, to guarantee a longer machine service life. So even if the machine is hit by the loader, the tub structure will not be damaged.

Exclusive KUHN mixing auger!

The double-pitch angle of the auger enables quick breakdown of feed including whole bales, no matter how full the machine already is.
To reduce power consumption, the EUROMIX range is equipped with asymmetric knives which give a “self-cleaning” effect and also have a progressive-cutting knife edge for constant torque transfer. The continuous auger helix naturally moves the fodder from the bottom to the top of the tub for even mixing with no forced movements, reducing fuel consumption during the mixing process.
The auger material and design has been selected to provide maximum resistance to wear.

Tried and tested transmission and drive systems!

The machine transmission is made up of a two-stage bearing therefore even during breakdown of a whole bale, stress is absorbed.
The combination of the pre-stressed subframe and the solid auger base provides maximum resistance to the load bearing in the bottom of the machine.
The unit is fitted on a collar which reaches up to approximately half the auger height, thus protecting the transmission from lateral forces exerted on the auger.

Transmission representing KUHN's extensive experience and technological expertise.

Even quicker chopping and mixing

The EUROMIX tubs are polygonal so as opposed to “rolled” bodies, the tubs have multiple sides. This design greatly improves machine resistance to strain, particularly when breaking down whole bales. This design also saves time when chopping longer forage thus decreasing overall mixing time. The counter-knives are positioned diagonally with respect to the auger axis and jointed at the top, thereby reducing the space between the counter-knife and the auger and increasing the contact surface with the fodder.

High mixing quality for optimum rumination!

For a healthy herd, the ration must be evenly mixed and perfectly distributed, no matter what the levels of dry matter are.
The EUROMIX range’s mixing auger was designed with the chopping performance of long fibres in mind, as well as preserving wetter fodders such as maize silage.
Various configuration options tailor the machine to your needs.

Weighing system: choose your level of data

Independent chassis on KUHN EUROMIX I mixer for weighing with the machine unhitched!

Independent chassis for weighing with the machine unhitched!

Standard on EUROMIX models, large section chassis provide weighing stability and accuracy. The chassis is the main part of the machine and gets put under high levels of stress during loading, transport and unloading phases.The longevity of the weigh cells is guaranteed as they are positioned between the tub and the chassis. It is this design that allows weighing operations to be performed while the machine is unhitched (as the weigh cells are still under stress). The option to fit your machine with a battery kit will allow the weighing system to be powered without being connected to the tractor.

Optional DATA ADVANCE software for Data Transfer

Programming (via cloud communication) from PC or smartphone - Editing of ingredients, rations and feed batches from the weighing terminal - Editing of the number of animals from the weighing terminal - Lists and reports of completed programs with summary of operator discrepancies - Multi-user management (admin – users) - Monitoring with indicator customisation - Data exchange via 3G modem or USB flash drive - Calculation of ration costs and dry matter content - Stock management

With your KUHN DG600 weighing terminal, your can choose the optional "DTM ADVANCE" software for data transfer

With your weighing terminal, choose your digital assistant!"

You can choose one of these digital devices to run the solutions offered along with the weighing terminals. You can take your new assistant with you everywhere! You’ll be able to control your mixer weighing system during loading and feeding, but also from your office. - with the indestructible 5,7’’ mobile assistant, you have your weighing system in your pocket! - or the all terrain 8’’ mobile assistant for optimal navigation!

With the KUHN Feed Tracking SILVER data management programme, your KUHN mixer allows for two-track data transfer

Two different interfaces to fit how you manage your feed-related information

The 2 applications KUHN Datamix VIEW and KUHN Datamix CONTROL are pre-installed on your weighing assistant. You’re bound to have all your needs met with the easy-to-use secondary display unit (KUHN Datamix VIEW) and the application that lets you program and perform all the functions of your mixer’s weighing unit from your assistant (KUHN Datamix CONTROL). You can access all the weighing data within a communication range of 90 m around your machine. The signal is automatically reset when you re-enter the range.- With the KUHN Datamix VIEW, your assistant becomes the secondary display you'll never leave behind!- with the KUHN Datamix CONTROL, your assistant becomes the control centre for your machine's weighing system.

Select the feeding system: a lot of possibilities!

Distribution chutes on KUHN EUROMIX mixer: express delivery!

Distribution chutes: express delivery!

These distribution chutes allow for quick and simple feed delivery to floor-level feeding passages.
Distribution chutes can be fitted upon request at the front right or left, rear right or left, etc. for feed delivery in all types of building configuration, even in buildings with no separate exit. The EUROMIX mixer wagon is fitted with a deflection plate to avoid driving over the ration fed out. The protective canvas prevents fodder being projected beyond the trough.

Tilting conveyors to adapt to all types of troughs

The EUROMIX range can be fitted with a large selection of hydraulically tilting conveyors to deliver feed to troughs or feed bunkers. The PVC tilting conveyors belts come in different lengths. They start up automatically when the door hatch is opened to prevent jamming at the tub outlet. The EUROMIX tilting conveyors are quiet, always clean and easy to service: simply by adjusting the belt tension on a regular basis.

The tilting conveyors of the KUHN EUROMIX range are quiet and easy to service

Equipment

K-NOX Mixing augers and K-NOX doubling plates: Long Life Solutions!

K-NOX substantially increases the life expectancy of the auger - the central component of the mixer which determines its level of performance. The entire mixing auger is made of K-NOX: the whole unit is protected (coil, cone, scraper) therefore it is more resistant to the wear and tear caused by friction, acidic feed and general corrosion.
For even greater durability, the K-NOX doubling plates are available as an option.

Magnets: play it safe with your animals!

Metal trap: play it safe!

All the models in the EUROMIX range can be fitted with a magnet on the mixing auger. This system considerably reduces intestinal injuries caused by the ingestion of metal fragments contained in the fodder (barbed wire, scrap wire etc.).

Hydraulic counter-knives for fibrous rations that require more chopping

For fibrous rations that require more chopping, add the option of two hydraulic counter-knives. Then you can extend and retract the counter-knives as needed from the tractor cab.

KUHN mixers: fingertip control of your machine

Electric controls: fingertip control of your machine

The user-friendly electric system provides you with fingertip control of your machine. The small control box can be fitted in any type of tractor cab.

Dealing with an expanding herd and the new buildings layouts

A scalable machine to adapt to herd size and ration type

KUHN mixers grow with your farm. As a result of an increase in your herd size or a change to ration components, you may be required to change the capacity of your TMR mixer. Depending on your model in the EUROMIX range, you can increase your machine’s capacity by at least 61%.

Specifications

Technical characteristics


Capacity (m³)
Mixing system
Minimum PTO power requirement kW (hp)
PTO speed (min^-1)
Output mini/maxi (l/min) at 180 bar (pressure required)
Minimum tractor hydraulic requirement with direct control
Minimum tractor hydraulic requirement with electric control (optional)

EUROMIX 28.3 DL	EUROMIX 33.3 DL	EUROMIX 39.3 DL	EUROMIX 45.3 DL
28	33	39	45
3 vertical augers	3 vertical augers	3 vertical augers	3 vertical augers
73 (100) > 88 (120)	86 (117) > 102 (140)	98 (134) > 117 (160)	111 (151) > 132 (180)
540	540	540	540
20 - 50	20 - 50	20 - 50	20 - 50
1 DA for chute, 1 DA for hydraulic jack and 1 DA per additional function	1 DA for chute, 1 DA for hydraulic jack and 1 DA per additional function	3 DA for chute and hydraulic jack and steering tridem axle and 1 DA per additional function	3 DA for chute and hydraulic jack and steering tridem axle and 1 DA per additional function
1 SA with free return and 1 DA for hydraulic jack	1 SA with free return and 1 DA for hydraulic jack	1 SA with free return and 2 DA for low steering tridem axle and hydraulic jack	1 SA with free return and 2 DA for low steering tridem axle and hydraulic jack