ARTEC F40 EVO self-propelled !

A stable boom, close to its target, ensures precision spraying. Thanks to the EQUILIBRA suspension frame on the ARTEC F40 EVO self-propelled sprayer, the boom stays perfectly parallel to the chassis in all conditions!

• The frame combines a pendulum system and a link system to absorb the boom's rotational movements and sideways shifts. It provides incomparable stability on bends and slopes.

• The double-cylinder anti-sway system reduces the effects of acceleration and braking on the boom, thus limiting stress on the frame. The rotational locking and bronze bushings on the axles also ensure long-lasting performance.

• Finally, a hydraulic tilt control system keeps the boom flat and parallel to the chassis in all conditions.

To complete the action of the EQUILIBRA frame, the position of the boom on the ARTEC F40 EVO self-propelled sprayer is actively adjusted by a ground tracking system using 3 ultrasonic sensors. So, whatever the terrain, this system keeps the boom in the right position, by controlling:

• The parallelogram for height,
• Tilt correction,
• And the variable geometries (positive and negative).

You can drive without worrying about the boom. The technology controls all the hydraulic functions to stay close to the target and ensure optimum spray quality!

With the new-generation control system, the centrifugal pump controls itself automatically as needed. It has a capacity of 780 L/min (at 3 bars) and is connected to the spray circuit, providing very high capacities in terms of output and application quality.

Direct regulation enables the pump to automatically adjust its speed immediately as needed, in addition to a control valve designed to adapt to even the slightest variations.

With the dual-pump circuit, you can perform all rinsing functions independently from the cab, either manually or automatically. Choose between rinsing with the sprayer stationary (automatic or manual) or select continuous dilution mode to rinse while spraying.

Do you have to stop in the middle of spraying for some reason? You can also rinse just the boom using a special 'boom rinse' mode. With a low dead volume, residue management becomes simple, fast, and effective.

With the "continuous dilution" mode, you can activate the two pumps (spray and rinse) at the same time to rinse the tank and circuit by dilution. You can perform multiple dilution cycles thanks to the 600 L capacity of the rinsing tank.

An optional pump is available to inject a neutralizing agent during the rinsing phases. A molecular neutralizing agent can be added during the rinsing phase to change products with no risk for the next application. This is perfect for farmers who use different products and crops during the season.

To enhance working comfort, the ARTEC F40 EVO is available with automatic four-wheel steering. Once the "working" speed range is activated, all four wheels work with the same steering angle. When spraying starts, only the front wheels steer, to reduce the 'yaw' effect on the booms. The four wheels can still be manually controlled to navigate bends while spraying or to adjust for sloping terrain using the "crab" steering mode.

A patented solution controls the steering mode:

• When travelling forward, front wheel steering mode is on.
• When reversing, rear-wheel steering mode is on.
• At the end of the field, four-wheel steering mode is on.

Experience unparalleled driving with the ARTEC F40 EVO self-propelled sprayer, offering exceptional visibility for optimal focus.

• Maintain an unobstructed view of the spraying area without turning around.
• Control all your machine's settings in real time.
• Easily identify obstacles.
• Navigate your fields with confidence.
• Quickly detect any spraying problems.

With the front-positioned boom, you'll save time during spraying operations with improved manoeuvrability, and navigate tricky fields with increased confidence. This design enables the operator to get closer to the edges of the field and navigate narrow spaces and obstacles with no visibility problems, making the work easier.

Regular maintenance of your machine prevents premature wear of components, ensuring longer service life and optimum performance. KUHN has designed the ARTEC F40 EVO self-propelled sprayer to simplify all these operations.

• You can fill all tanks (fuel, aqueous urea solution, hydraulic and engine oil), as well as access the machine's components that require servicing (engine, cooling system, etc.) from the platform at the rear of the sprayer.

• The right-hand side of the machine was specifically designed for easy access to the hydraulic and spray filters.

• A blower is available with different connection points on the machine to give you compressed air wherever you need it.

• As an option, a centralized lubrication system performs most of the lubrication (excluding the boom) on this self-propelled machine.

You can perform all the necessary operations, such as filling the solution tank, the rinsing tank and incorporating products, all from the operator's station. It has been specially designed to ensure your safety during loading operations, thanks to simple controls and an optimized induction bowl.

• The induction bowl on a hydraulically-assisted parallelogram has a capacity of 25 L. It features stainless-steel graduation for safe and accurate incorporation of products. There is a convenient shelf where you can safely place a bag or jug.

• A single electrohydraulic valve for all possibilities: incorporation, filling, spraying, external discharge and rotary washers. Positions are selected via the control panel: by simply pressing the desired function, the valve rotates and positions itself on that function, effortlessly and with no risk of operator error.

• Overflow is prevented by the automatic shut-off system. A valve on the manhole directs any overflow to the ground without risk to the operator or the machine during manual filling.

• During filling, the operator can pause the process to allow enough time to incorporate the products. Thanks to the dual-pump circuit, incorporation can be done with clean water using the filling pump or via the closed circuit using the sprayer pump.

• Via the control unit, you can control the position of the induction bowl, program the density and volume to be filled, switch off the filling pump at any time, and monitor the volume in the tank.