Mounted sprayer ALTIS 2

The OPTILIFT parallelogram features a 2.50 m working height (when hitched to the tractor) and allows the boom to be lifted high for work in tall crops. Compared to the many sliding mast models available on the market, this often represents an additional 50 to 80 cm in working height.

When in the transport position, the boom is not fixed but is suspended directly by the OPTILIFT parallelogram. All irregularities in the road are thus dampened, and the boom is protected.

Specially designed for RHPM, MTS2 and MTA3 booms, the TRAPEZIA boom suspension is perfectly adapted to the ALTIS 2 sprayer.
The TRAPEZIA suspension is monitored by two rods that hold the boom, as well as two springs that allow the boom to naturally follow sloping terrain. Tilt correction is mechanical and automatic. A hydraulic tilt corrector is available for more specialised applications. Main characteristics:

• 2 stabilising links
• Automatic mechanical tilt corrector
• Hydraulic tilt corrector

The EQUILIBRA suspension with pendulum links provides the boom with a three-dimensional shock absorption system. The EQUILIBRA suspension system allows the boom to remain perfectly parallel to the ground when driving over rough terrain. The boom runs smoothly over the ground and the crops without shifts or drifts!
On uneven terrain, the combination of a pendulum and links offers sufficient freedom of movement to keep the boom steady, regardless of the type of terrain encountered. Two shock absorbers also dampen and limit vertical movements to keep the boom perfectly level, especially when cornering at high speed.
The EQUILIBRA suspension is designed to work in intensive conditions and includes an independent anti-whiplash system protecting the boom while cornering or during acceleration/braking.
EQUILIBRA 3D SUSPENSION: FOR INTENSIVE CONDITIONS!

• Robust pendulum movement
• Link rods for radial movement
• Shock absorbers to eliminate any rebounds
• Independent left/right anti-whiplash system
• Spring-loaded automatic tilt corrector
• Frame locking

Manual MANUSET operation offers you complete control when preparing your products. With only 2 main manual valves, all of the sprayer's functions are controlled from the operator's control station.
With the 360° multifunction handwheels, handling operations are reduced by up to 50%. Thanks to an ergonomic design, the valves are easily operated for a simple, trouble-free set-up. Multifunction handwheels make spraying easier.
During rinsing, a 360° rotation with the delivery circuit handwheel ensures that the water drawn in by the pump is conveyed into all sprayer circuits. The rinsing tank level gauge at the work station allows for even easier sequencing of the rinsing operations.

Rinsing of the sprayer or the boom, from the cab.
Suction filling is programmable and stops automatically when the setpoint is reached. A dual control also allows you to maintain control of all the functions from the operator's control station.
During rinsing, and without exiting the tractor cab, simply click the terminal to draw in water. Then send it where you want it to go: to the rotary washers to rinse the tank, or directly to the boom to rinse boom pipes, without diluting the spray mixture in the tank.
Finally, the actual volume remaining in the tank can be displayed on the in-cab terminal throughout the entire spraying operation.
Available with REB3 / VISIOREB / ISOBUS terminals.

Rinsing of the sprayer or the boom only, from the cab.
Suction filling is programmable and stops automatically when the setpoint is reached. The "EASYSET" remote unit allows the operator to control all functions from the operator control station.
During the rinsing process, the RINS ASSIST system automates the rinsing sequence based on the amount of product remaining in the machine. The system ensures 1% dilution of the tank residue.
Finally, the actual volume remaining in the tank can be displayed on the in-cab terminal throughout the entire operation.
Available with REB3 / VISIOREB / ISOBUS terminals.

The sprayer's 35-litre chemical induction bowl is characterised by its funnel shape, enabling efficient incorporation of all types of products: liquids, powders and granule. The rinsing system consists of 2 rotary nozzles designed to clean jugs, measuring cups, containers and the chemical induction bowl.
The induction bowl has only one valve through which the active ingredient can be introduced into the circuit. This valve is safely actuated by a foot pedal thus avoiding the need for the operator to bend down. All other operations are carried out using the hand-held lance located nearby. The induction bowl is rinsed with the cover closed, thereby preventing any risk of splashing or misting.