Flail mowers BV 10

BV 14 flail mower Silhouette

The wine grower's ally!

BV series 10 shredders with a working width of 0.96 to 1.53 m are perfectly suited to wine structures and equipment. They have been specially designed for vines of small widths.

Find a distributor near you

In vineyards, there are many areas of use and agronomic advantages of shredders. Shredding between rows is the key to accelerating the decomposition and transformation into humus of organic matter, but also helps to fight the spread of certain parasites, diseases and weeds. Thus, shredding preserves the health of plantations by increasing the contact area between organic matter and microorganisms: pests have neither the time nor the place to grow in the prunings. The resulting humus transformation results in increasing nutrients available to feed crops and fertilize soils, improved soil structure and stability, as well as stimulating biological activity. Shredding helps to control the spread of weeds by avoiding their dispersal when made before seeding, making it possible to reduce the use of herbicides. It also effectively limits water evaporation and protects the surface of the soil from solar radiation by optimizing its coverage with the shredded material. As a result, water resources are preserved and remain available for planting during drier periods. Finally, prunings can be an economical and ecological energy resource if harvested from the start when shredded, to be used as heating fuel and as a renewable energy source. A real alternative to fuel or electricity, the use of this resource contributes to the reduction of CO2 emissions.
BV 14 at work

Your benefits

Enjoy a reliable shredder for your vineyards

BV 10 series range of whic the BV 14 shredder perfectly adapted to vineyards

A shredder adapted to wine making structures and equipment

Available with rear attachment, the BV 10 series is perfectly adapted to tractors up to 90 hp. The low position of the casing allows you to pass between plants without damaging them. The opening of the casing can reach 29 cm, making it one of the highest on the market, to best adapt to the height and size of the windrow. The prunings are no longer dragged in the space between the rows, they are collected and shredded finely in order to optimise decomposition and restore organic matter to the soil. With this shredder, you benefit from an excellent shredding quality of branches and wood up to 5 cm in diameter and 5 cm distant from the vines.

Maximum reliability for shredders BV 10 series

A roller with removable ends provides height adjustment. With the latter, support is provided on the entire working width. The new design of the hammer knives prevents marking the rotor tube in case of impact and hammer return. The risk of vibration, tube deformation or rotor imbalance is reduced. With 1.2 kg hammer knives, 3 standard counter blades and a 398 mm rotor, you obtain quality shredding for rapid residue decomposition.
The hammer knives of shredders BV 10 series allow preventing rotor tube marking in case of impact

Easy and fast maintenance

Maintenance is simple and fast with the BV 10 series shredders

Save time and money

Rollers with removable ends for professional use are easily adjustable for lower-cost maintenance. Power transmission is enhanced with the new PowerQuad IV belts and the new high-performance central gearbox. You'll save time and money with this reliable drive and the minimum maintenance requirement.

Numerous equipment

Optional equipment allow adapting the shredder to the various conditions of work

Several equipment available to adapt your shredder

All standard-mounted shredding components (roller, tools) are designed for intensive operations. In addition, the many optional equipment (pick-up, inter-row hydraulic disc...) of the BV 10 series make it possible to perfectly adapt these machines to your field conditions.
Vineyard shredder BV 14, transport on roads

Specifications

Technical characteristics

 
Working width (m)
Overall width (m)
Outer rotor diameter (mm)
Tool linear speed (540 rpm/1000 rpm in m/s)
Number of heavy hammer knives
Number of counter-knives
Working height adjustment
Roller diameter (mm)
PTO speed (min-1)
Free wheel integrated in the central gearbox
Number of belts
Belt type
Rotor speed (min-1)
Minimum power allowable at gearbox (kW)
Minimum power allowable at gearbox (hp)
Maximum power allowable at gearbox (kW)
Maximum power allowable at gearbox (hp)
Hitch
Side offset (mm)
Weight with equipment (kg)
BV 10 BV 12 BV 14 BV 16
0.96 1.15 1.34 1.53
1.08 1.27 1.48 1.67
398 398 398 398
50 50 50 50
12 12 16 16
As standard - 1 notched, 2 straight - Welded As standard - 1 notched, 2 straight - Welded As standard - 1 notched, 2 straight - Welded As standard - 1 notched, 2 straight - Welded
Roller with removable ends Roller with removable ends Roller with removable ends Roller with removable ends
140 140 140 140
540 540 540 540
Integrated in the central gearbox Integrated in the central gearbox Integrated in the central gearbox Integrated in the central gearbox
2 2 3 3
QP4 QP4 QP4 QP4
2404 2404 2404 2404
26 29 33 37
35 40 45 50
67 67 67 67
90 90 90 90
3-point - Cat. 1 3-point - Cat. 1 3-point - Cat. 1 3-point - Cat. 1
No No No No
330 360 390 440

Media