Grass Flail Mowers BP-BPR 100

Benefits
Specifications
Media

Download the Literature

Agricultural and landscape shredders

English lietuvių Nederlands norsk Polski Română Русский svenska čeština Deutsch dansk Español Français български Brasileiro Magyar український 中国人

Your ally for maintenance

Seven models of multi-purpose shredders available in 4 working widths (2.10 m to 3.03 m) for shredding all types of grassy areas and aimed at individual farms or communities

Find a distributor near you

Download the Literature

Agricultural and landscape shredders

English lietuvių Nederlands norsk Polski Română Русский svenska čeština Deutsch dansk Español Français български Brasileiro Magyar український 中国人

Benefits
Specifications
Media

The offset possibilities, the adjustable rear hood, the choice of tools, it is thanks to this versatility that these shredders are adapted to various uses such as the maintenance of pastures, orchards, scrub land but also shredding of crop residues or intermediate crops.

A multi-purpose shredder adapted to your needs

A robust multi-purpose hood for BP 100 series shredders

An adjustable hood to adapt to the volumes of residues

The rear hood is adjustable. Adjust it to the minimum for shredding slightly dense vegetation or maximum product recycling. Adjust it to the maximum when shredding dense vegetation or if you want to work faster, while limiting the power input.

A hydraulic offset for shredding all your surfaces

The sliding offset of 58cm allows it to reach the most difficult to access corners.
The BPR 100 models are equipped with a hydraulic offset to the right using a sliding double tube system (one lower and one upper tube). This design reduces the machine overhang and limits stress on the hitch frame when
working in offset position.
BPR 100 series shredders are fitted as standard with a hydraulic offset.

Offset by sliding system on BP-BPR 100 series shredders

Front or rear attachment for the BPR 100 series

Front or rear attachment are possible. The BPR 100 series allows coupling the machine very easily to the tractor front or rear without any disassembly. Used in front mounted version, the tractor does not roll over plants for an even shredding. Work can also be carried out in combination, front or rear, with an offset arm verge shredder or a hedge and grass cutter.

BPR 100 series shredders can be coupled to the front or rear according to your needs

The BPR 100 PRO shredder adapts to powerful tractors

The hitch is higher for use with powerful tractors, up to 230 hp. The top link remains floating to improve ground following. The robust lateral drive consists of five Powerband belts and an automatic tensioning system to withstand the most extreme work stresses. The shredder is also equipped with a 580 mm hydraulic side offset.

The BPR PRO range adapts to high power tractors for intensive use

High-quality shredding, fast decomposition

Benefit from a perfect shredding with the range of BP - BPR 100 series shredders

High-performance shredding unit

The 8 rows of tools arranged in helical layout on the rotor ensure perfect suction and consistent distribution of residues on the ground at the rear of the rotor. In addition, the shredding casing is equipped with two counter knives (one straight and one notched) for impeccable shredding.

Adapted tools

Adapt the machine to your needs by selecting the tools that are best suited::

Heavy+A101 hammer knives for grass.
Y knives for crop residues.

Heavy hammer knives can be fitted on the shredder BP 100 series

Controlled working height

Controlling the working height is essential to shred efficiently and preserve the plant cover. The BP 100, BP 100 PRO and BPR 100 series shredders can be equipped with:

Either a 220 mm diameter roller with fixed or removable ends, positioned as close as possible to the rotor for improved ground adaptation, an ejection of the shredded material over the roller and a self-cleaning capacity by the tools.

Either semi-pivoting wheels attached to the shredding casing (only for BP 100 series)

A working height under control owing to the roller with removable ends

Robust and reliable

The hitch frame design is robust to ensure the shredder's durability

A robust structure

The hitch frame design composed of a reassembled structure is particularly robust. The shredding casing is reinforced as standard with a 4 mm sheet metal lining for increased service life.

A faultless drive

BP, BPR and BPR PRO 100 series shredders are fitted with:

a gearbox for tractors of maximum 175 hp (230 hp for the BP 100 PRO)
an automatic belt tensioning system.
three to five belts, depending on the model.

A faultless drive for BP, BPR et BPR PRO shredders

The hitch frame design is perfectly robust on the range of BP 100 series shredders

Specifications

Technical characteristics


Working width (m)
Overall width (m)
Outer rotor diameter (mm)
Tool linear speed (540 rpm/1000 rpm in m/s)
Tool linear speed (m/s) - at 540 min^-1
Tool linear speed (m/s) - at 1000 min^-1
Number of hammer knives
Number of heavy hammer knives
Number of Y knives
Number of articulated scoop flails
Number of counter-knives
Reinforcing plate
Skid kit
Working height adjustment
Roller diameter (mm)
Tyres
PTO speed (min^-1)
Free wheel integrated in the central gearbox
Number of belts
Belt type
Automatic belt tensioning
Rotor speed (min^-1)
Rotor speed (min^-1) at 540 min^-1
Rotor speed (min^-1) at 1000 min^-1
Minimum power allowable at gearbox (kW)
Minimum power allowable at gearbox (hp)
Maximum power allowable at gearbox (kW)
Maximum power allowable at gearbox (hp)
Hitch
Side offset (mm)
Required tractor hydraulic connections
Required tractor electrical connections
Weight with equipment (kg)

BPR 210	BP 240	BPR 240	BP 280	BPR 280	BPR 280 PRO	BP 305	BPR 305	BPR 305 PRO
2.10	2.37	2.37	2.79	2.79	2.79	3.03	3.03	3.03
2.40	2.55	2.55	3.10	2.99	2.96	3.34	3.34	3.34
465	465	465	465	465	465	465	465	465
					46			46
45	45	45	45	45		45	45
48	48	48	48	48		48	48
22	24	24	28	28		32	32
					28			32
44	48	48	56	56		64	64
54		60		72			78
1 notched, 1 straight - welded	1 notched, 1 straight - welded	1 notched, 1 straight - welded	1 notched, 1 straight - welded	1 notched, 1 straight - welded	1 notched, 1 straight - welded (3rd notched as optional equipment)	1 notched, 1 straight - welded	1 notched, 1 straight - welded	1 notched, 1 straight - welded (3rd notched as optional equipment)
As standard 4 mm, welded	As standard 4 mm, welded	As standard 4 mm, welded	As standard 4 mm, welded	As standard 4 mm, welded	As standard 4 mm, welded	As standard 4 mm, welded	As standard 4 mm, welded	As standard 4 mm, welded
As standard - side, fixed, wide, rounded	As standard - side, fixed, wide, rounded	As standard - side, fixed, wide, rounded	As standard - side, fixed, wide, rounded	As standard - side, fixed, wide, rounded	As standard - side, fixed, wide, rounded	As standard - side, fixed, wide, rounded	As standard - side, fixed, wide, rounded	As standard - side, fixed, wide, rounded
By roller with removable ends	By roller with removable ends or support wheels	By roller with removable ends	By roller with removable ends or support wheels	By roller with removable ends	By roller with removable ends	By roller with removable ends or support wheels	By roller with removable ends	By roller with removable ends
220	220	220	220	220	220	220	220	220
	185-60 R14		185-60 R14			185-60 R14
540 or 1000 - Left or right direction of rotation*	540 / 1000*	540 or 1000 - Left or right direction of rotation*	540 / 1000*	540 or 1000 - Left or right direction of rotation*	540 / 1000	540 / 1000*	540 or 1000 - Left or right direction of rotation*	540 / 1000
As standard	As standard	As standard	As standard	As standard	As standard	As standard	As standard	As standard
3	3	3	5	5	3 + 2 strands	5	5	3 + 2 strands
SPBX	SPBX	SPBX	SPBX	SPBX	Powerband XPB	SPBX	SPBX	Powerband XPB
					As standard			As standard
					1870			1870
1833	1833	1833	1833	1833		1833	1833
1960	1960	1960	1960	1960		1960	1960
55	59	59	66	66	70	74	74	81
75	80	80	90	90	95	100	100	110
129	129	129	129	129	169	129	129	169
175	175	175	175	175	230	175	175	230
3-point - Cat. 2 - Front / Rear - fixed or floating	3-point - Cat. 2 – fixed	3-point - Cat. 2 - Front / Rear - fixed or floating	3-point - Cat. 2 – fixed	3-point - Cat. 2 - Front / Rear - fixed or floating	3-point - Front/Rear - fixed or floating - Cat. 2 and 3	3-point - Cat. 2 – fixed	3-point - Cat. 2 - Front / Rear - fixed or floating	3-point - Front/Rear - fixed or floating - Cat. 2 and 3
520 - Hydraulic	580 - Mechanical as standard or hydraulic as optional equipment	580 - Hydraulic	580 - Mechanical as standard or hydraulic as optional equipment	580 - Hydraulic	580 - Hydraulic	580 - Mechanical as standard or hydraulic as optional equipment	580 - Hydraulic	580 - Hydraulic
					1 DA			1 DA
					1 electric plug and 3-pin ISO socket			1 electric plug and 3-pin ISO socket
870	820	950	900	1020	1120	950	1100	1200